Detail

Photovoltaic Rolling Glass Industry- HP ZrO2 Composite Ceramic Lip Brick

The high-purity and high-performance nano-zirconia composite ceramic lip bricks produced by Fangming NewM, Itis used in the front zone of shaping rolls of the glass production line. The size of this product we are supplying can be customized according to customer’s required size. Itis composed by the several pieces with the seamless joints and the smoothness of the surface is controlled below 0.003 mm. It has the excellent thermal shock stability, the strong erosion of alkaline resistance, long serving life and high yield rate of glass products etc.advantages. We can provide the super- high-temp. ZrO2 nano-ceramic products with the large size and complex shapes, the supplied size ranges: Length of 200-1200MM, width of 200-1000MM，and Height of 15-50MM.

The results showed that after mullite fibers were toughened, the fibers distributed evenly in the composite aerogels and played the role of skeleton support. The compressive strength of the composite aerogels increased with the increase of fiber volume fraction. When the fiber volume fraction was 10%, the compressive strength of the composite aerogels reached 0.408MPa (10% deformation). At the same time, the introduction of fiber had no obvious effect on the three-dimensional net pore structure and thermal insulation properties of the composite aerogels.

Ultra-high-temp rare earth oxide composite ceramics products, we will provide the all-round integrated solutions for ultra-high-temp. temperature, high erosion resistance and high erosion application conditions.